Wednesday, 14 February 2024

 Today 13th Feb I worked on the lazarette,
cockpit drains and tubes

did some west fast epoxy work on the tubes so that I could glue them in today - cut the lazarette access hole, routed a bevel on the transom and the front face of the lazarette, glued and filleted the front face of the lazarette,  glued and filleted the tubes in and then lots of layers of glass with peelply to finish


40mm vs 50mm tube





















at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

  The forepeak/cargo hold door has been fitted This is the door to the front of the boat that will create a watertight closure at the mast b...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • (no title)
    What is the holdup? - Why no sea trials? Well, for all those following, here is the update - Everything was set for leaving, sails bent on, ...
  • (no title)
    A new project in the workshop