Monday, 5 February 2024

 Cockpit sides and cockpit floor filleted in,
Watertight hatches in progress, 


the cockpit sides and floor were final coated, then the framing was precoated with unthickened epoxy and then they were bonded in with thickened epoxy and screwed in as well, fillets were then added, 


cockpit floor framing pre-coated




the underside of the cockpit floor with its epoxy coats was precoated where the epoxy glue is to be added




starboard side done

port side done


Bow flotation bulkhead hatch and above it is the mast bulkhead (will be watertight) hatch




at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

A round the world non stop record challenge  in a modified 5.8m Class Globe  Alessio Campriani is busy with his challenge at the smallest bo...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • (no title)
      The forepeak/cargo hold door has been fitted This is the door to the front of the boat that will create a watertight closure at the mast b...
  • SETKA A - Cagarro - where it all began
    Where it all began and why I decided on a  a SETKA A 5m over a Class Globe 580  In March 2020  - I saw on the internet what I thought was a ...