Cockpit coaming risers glued and filleted,
Transom drain holes cut
The cockpit risers were glued and screwed in - they were also coated with their final coat of epoxy before they were installed and the coaming lids had their final coat of epoxy before the riser was glued in,they had some fillets done as well - the riser was filleted to the cockpit seat and the transom with a large structural fillet
cockpit riser to transom fillet
the holes to take the 50mm epoxy glass drain tube was cut in the transom and in the front face of the lazarette.
No comments:
Post a Comment