Tuesday 13 February 2024

 Flush trimmed the cockpit edges , Made a new 50mm glass tube, prepping for deck


Flush trimmed the cockpit edges and the coaming edges,


 and made a new 50mm tube as I decided to make bigger drain holes
 than my previous 40mm tube,


40mm


50mm next to 40mm

and started prepping for adding the deck
at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

  Working on rudder, Stainless, mast step, companionway hatch and lots of small things and of course sanding, and received my NEW epoxy good...

  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpler
  • (no title)
     busy preparing the strongback , no pictures  check back soon though ,as it will get very interesting from here onwards for the time being...