Thursday, 25 January 2024

 Aft compartment under Cockpit glassed


the aft compartment was glassed using one complete layer of glass on the bottom and up the sides, then another wide tape was glassed along the filletted edges of the two added transverse panels, and then 12 layers were added in differing dimensions and configarations to the aft edge and bottom of the compartment.



and two layers of glass were added to the beam that divides the cabin floor from the under cockpit stowage to increase abrasion resistance to the beam. the bottom layer went over the beam so finally the beam has 3 layers of glass.



job done





at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

 NMEA connections and the low power interior lights Just some futher pictures from the last few weeks all the NMEA connections are contained...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Bow basket/ Pulpit series drogue attachment and all chainplates mounted, and galley box  These are some of the many things I have not shown...