Tuesday, 25 April 2023

 The stem is placed


I had some things that needed to be clarified before building could carry on. Today the stem was placed, It sometimes is needed to do some traditional methods to build something




because the laser level was so close to the stem and at the KWL it did not project down far enough to check plumb. Plumb bob to the rescue




at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

A round the world non stop record challenge  in a modified 5.8m Class Globe  Alessio Campriani is busy with his challenge at the smallest bo...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • (no title)
      The forepeak/cargo hold door has been fitted This is the door to the front of the boat that will create a watertight closure at the mast b...
  • SETKA A - Cagarro - where it all began
    Where it all began and why I decided on a  a SETKA A 5m over a Class Globe 580  In March 2020  - I saw on the internet what I thought was a ...