Thursday, 15 February 2024

 TEASER! one side of the deck is on,
check back soon for the full deck reveal


at No comments:

Wednesday, 14 February 2024

 Today 13th Feb I worked on the lazarette,
cockpit drains and tubes

did some west fast epoxy work on the tubes so that I could glue them in today - cut the lazarette access hole, routed a bevel on the transom and the front face of the lazarette, glued and filleted the front face of the lazarette,  glued and filleted the tubes in and then lots of layers of glass with peelply to finish


40mm vs 50mm tube





















at No comments:

Tuesday, 13 February 2024

 Flush trimmed the cockpit edges , Made a new 50mm glass tube, prepping for deck


Flush trimmed the cockpit edges and the coaming edges,


 and made a new 50mm tube as I decided to make bigger drain holes
 than my previous 40mm tube,


40mm


50mm next to 40mm

and started prepping for adding the deck
at No comments:
Subscribe to: Posts (Atom)

Replaced the Blocks with a low friction cascade on the boom vang I am always looking at better ways to optimize things and seeing as I had s...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • (no title)
      The forepeak/cargo hold door has been fitted This is the door to the front of the boat that will create a watertight closure at the mast b...
  • SETKA A - Cagarro - where it all began
    Where it all began and why I decided on a  a SETKA A 5m over a Class Globe 580  In March 2020  - I saw on the internet what I thought was a ...