More stringers
notching the frame
keeping the cutout bits to use as templates for the other side
much measuring and marking to get these shapes
using ropes and clamps to get the stringers to seat well
Subscribe to:
Post Comments (Atom)
Raspberry Pi Navigation System I have been busy setting setting up a navigation system that runs on a raspberryPi computer, a 10 inch scree...
-
Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl... -
The forepeak/cargo hold door has been fitted This is the door to the front of the boat that will create a watertight closure at the mast b... -
Where it all began and why I decided on a a SETKA A 5m over a Class Globe 580 In March 2020 - I saw on the internet what I thought was a ...
No comments:
Post a Comment