Thursday 4 May 2023

More stringers and 💃filleting💃yoga💃😊


It is amazing how strong this little boat is going to be, 20mm plywood bottom, 10mm plywood sides, 8mm decks, stem 6 cm/60mm (there is only one 3cm thick piece of the stem glued on at the moment, another piece will be glued on after the plywood sides are glued on) and all epoxy glassed !!!

Today the 70mm sheer clamp stringers  - scarf joints were glued up












The fillets just finish off the glue joint neatly



at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

  Working on rudder, Stainless, mast step, companionway hatch and lots of small things and of course sanding, and received my NEW epoxy good...

  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpler
  • (no title)
     busy preparing the strongback , no pictures  check back soon though ,as it will get very interesting from here onwards for the time being...