Today 13th Feb I worked on the lazarette,
cockpit drains and tubes

did some west fast epoxy work on the tubes so that I could glue them in today - cut the lazarette access hole, routed a bevel on the transom and the front face of the lazarette, glued and filleted the front face of the lazarette,  glued and filleted the tubes in and then lots of layers of glass with peelply to finish

40mm vs 50mm tube

 Flush trimmed the cockpit edges , Made a new 50mm glass tube, prepping for deck

Flush trimmed the cockpit edges and the coaming edges,

 and made a new 50mm tube as I decided to make bigger drain holes

 than my previous 40mm tube,

40mm

50mm next to 40mm

and started prepping for adding the deck

 Cockpit coaming risers glued and filleted, 
Transom drain holes cut

The cockpit risers were glued and screwed in -  they were also coated with their final coat of epoxy before they were installed and the coaming lids had their final coat of epoxy before the riser was glued in,they had some fillets done as well -  the riser was filleted to the cockpit seat and the transom with a large structural fillet

cockpit riser to transom fillet

the holes to take the 50mm epoxy glass drain tube was cut in the transom and in the front face of the lazarette.