Flush trimmed the cockpit edges , Made a new 50mm glass tube, prepping for deck

Flush trimmed the cockpit edges and the coaming edges,

 and made a new 50mm tube as I decided to make bigger drain holes

 than my previous 40mm tube,

40mm

50mm next to 40mm

and started prepping for adding the deck

 Cockpit coaming risers glued and filleted, 
Transom drain holes cut

The cockpit risers were glued and screwed in -  they were also coated with their final coat of epoxy before they were installed and the coaming lids had their final coat of epoxy before the riser was glued in,they had some fillets done as well -  the riser was filleted to the cockpit seat and the transom with a large structural fillet

cockpit riser to transom fillet

the holes to take the 50mm epoxy glass drain tube was cut in the transom and in the front face of the lazarette.

 Cockpit coaming tops glued and filleted

these are the "lids" for the under coaming storage lockers - They are done !!!, this was the most difficult glueup so far, as the access is not easy and glue cleanup and fillets were done in some pretty tight compartments in really awkward positions, boat yoga ??? - backwards downward dog is easy by comparison.