Frame A is completed
Today all the gussets were cut out and the frame was epoxy glued together and then the plywood gussets were epoxy glued and screwed onto the frame.
Saturday, 25 February 2023
Thursday, 23 February 2023
Frame C gussets cut and in progress
Frame C had its 60mm frame cut from a plank and fitted. Plywood was removed from the stack and templates for the gussets for the frame were measured from the plans and were cut from the plywood and epoxy glued and screwed to the bulkhead frame,
and the infill for the deck beam was epoxied on
and the final gussets will be glued and screwed on after the temporary screws holding the frame to the lofting board are removed.
Subscribe to:
Comments (Atom)
The Outboard SAGA If you have visited before you may have seen a nice shiny Tohatsu 3.5 on the blog and wondered about it. Well the Tohat...
-
Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl... -
What is the holdup? - Why no sea trials? Well, for all those following, here is the update - Everything was set for leaving, sails bent on, ...
