Frame A is completed 

Today all the gussets were cut out and the frame was epoxy glued together and then the plywood gussets were epoxy glued and screwed onto the frame.

Frame A started C completed

 Today frame A parts were cut to size and gusset templates made. Frame C completed.

 Frame C gussets cut and in progress

Frame C had its 60mm frame cut from a plank and fitted. Plywood was removed from the stack and templates for the gussets for the frame were measured from the plans and were cut from the plywood and epoxy glued and screwed to the bulkhead frame, 

and the infill for the deck beam was epoxied on 

and the final gussets will be glued and screwed on after the temporary screws holding the frame to the lofting board are removed.