Bunk risers glued and filleted
BTW the bits of wood on the keel bearers are to keep the bunk risers equidistant
added pics after glue has cured without some of the bits of wood that helped to temporarily locate the bunk risers
Subscribe to:
Post Comments (Atom)
Raspberry Pi Navigation System I have been busy setting setting up a navigation system that runs on a raspberryPi computer, a 10 inch scree...
-
Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl... -
The forepeak/cargo hold door has been fitted This is the door to the front of the boat that will create a watertight closure at the mast b... -
Where it all began and why I decided on a a SETKA A 5m over a Class Globe 580 In March 2020 - I saw on the internet what I thought was a ...
No comments:
Post a Comment