Wednesday 19 July 2023

 Hull glassing


the hull has been glassed. The bow panels where there were relieving cuts to enable nice bends were filled with west filler and then they were glassed over with one layer of glass, another layer was then put on the panel , so there is a double layer over the relief cut area - 




I decided after much consideration to run my hull glass as a horizontal layup rather than using lots of vertical pieces with lots of overlaps. this worked really well with my 80cm wide glass cloth, as each panel is narrower than 80cm 





at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

  Working on rudder, Stainless, mast step, companionway hatch and lots of small things and of course sanding, and received my NEW epoxy good...

  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpler
  • (no title)
     busy preparing the strongback , no pictures  check back soon though ,as it will get very interesting from here onwards for the time being...