Thursday, 27 July 2023

Fairing

 The boat is all glassed and fairing is in progress, this is the part that I said I would not bore you with hundreds of pictures, the goal is to put on the thinnest layer of fairing epoxy mix, and to get the boat fair, the mistake commonly made is to put on a thick layer of fairing mix and then to spend time sanding it off to create a very expensive dust.



if you would like to read more about epoxy, reinforcing with epoxy glass, and composite wooden boat construction have a look at the following link to the downloadable version of the west BIBLE on epoxy.


This has been my GO -TO reference on all things epoxy and boat repair ever since I built my Wharram Tiki 26, it answers every question you are likely to have about tool,s plywood, wood as a construction material, hull construction technoques, tanks, deck construction, fillets, fillers, prepping for paint and plywood  and composite construction. And more!

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

 NMEA connections and the low power interior lights Just some futher pictures from the last few weeks all the NMEA connections are contained...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Bow basket/ Pulpit series drogue attachment and all chainplates mounted, and galley box  These are some of the many things I have not shown...