Monday, 13 March 2023

 Rudder Transom and clean up all frames


Today the remaining 2 pieces of the rudder were glued-up - tomorrow the 2 pieces each of 2 pieces will be glued together, so in total 4 layers of ply in the rudders,



also 2 small backing blocks were glued in the transom, not totally needed but was in the plans for the centreboard version, 2 little blocks  of extra, stiffness and strength.



 and ALL the frames were cleaned up so that the plywood bulkheads are flush with the frames,

 just a few pieces of framing to glue onto the companionway bulkhead and the A frame for a cockpit floor support and then all frame/bulkheads are complete

- till tomorrow  - até amanhã
at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

 NMEA connections and the low power interior lights Just some futher pictures from the last few weeks all the NMEA connections are contained...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Bow basket/ Pulpit series drogue attachment and all chainplates mounted, and galley box  These are some of the many things I have not shown...