Friday, 3 March 2023

 Frame B and Transom glued up


Pre wetting out the end grain and the framing and the ply gussets with unthickend epoxy and then adding the correct fillers - fumed silica, west 403 and 404 to make a bonding adhesive and then gluing and then cleaning up really took a lot of time, so tomorrow the bulkheads of E and D will be glued, the bright side is all the framing is done.


at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Working on all the small details, watertight seals, deck layout, and Hard Dodger version 3.0 or 4.0 but most probably version 4.9.7.3. and m...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpl...
  • SETKA A - Cagarro - where it all began
    Where it all began and why I decided on a  a SETKA A 5m over a Class Globe 580  In March 2020  - I saw on the internet what I thought was a ...
  • (no title)
     Bow basket/ Pulpit series drogue attachment and all chainplates mounted, and galley box  These are some of the many things I have not shown...