More stringers and 💃filleting💃yoga💃😊

It is amazing how strong this little boat is going to be, 20mm plywood bottom, 10mm plywood sides, 8mm decks, stem 6 cm/60mm (there is only one 3cm thick piece of the stem glued on at the moment, another piece will be glued on after the plywood sides are glued on) and all epoxy glassed !!!

Today the 70mm sheer clamp stringers  - scarf joints were glued up

The fillets just finish off the glue joint neatly

 Cutting stringer slots, chiseling, glueing and filleting 
- repeat, repeat

the process of fitting the stringers is a longer process than you think, the bonus is that the structure stiffens up hugely with the glued stringers, I think the fillets are reasonably good.

one bow fillet glued, one joint ready to be glued

bow fillet sanded , one unsanded , still to be done

framing fillet

 The next lot of stringers ready to be placed

The 50mm stringers were scarfed and glued today and are ready to be placed, this operation was done inside the house as the workshop was being used to place the 30mm stringers. Also they were able to glue, without being disturbed, it is warmer and the cat could check them for quality.