Cockpit and Coachroof/ Deck framing

framing of these areas in progress

 Final fillets on bow  compartment, "cargo compartment and filling some gussets

lots of sanding done and some fillets done in the bow compartment, mainly on the horizontal bulkhead I added to keep the stringers from flexing, 

fillets on the cargo compartment divider

and filler blocks and epoxy added to 2 of the four places water can collect on the frame gussets,

these had to be done before the aft bunk support cleat was added (also done today) because then the block of filler wood could not fit into the space between the bulkhead and the gusset, because the cleat would block access -  two more to do on the transom, but they will be done when the cockpit is enclosed.

 Other side bunk tops cut out and floor panel cut

the bunk tops for the port side of the boat were cut out today , the first bunk tops for the starboard side were cut using this template

View from the bow "cargo" area

Starboard side looking forward

Port side looking forward

view from starboard side

view from port side

The floor panel still needs to be trimmed to length