Dodger /Pramhood final pics

 Outside/Inside of 2 piece Companionway
- Boat Ghetto Blaster

Here is the promised view of the complete 2 piece companionway from the outside and the inside - the lower piece has a mount for the Silva 70 compass.

and I made a Japanese Cedar 12V "ghettoblaster" as well as FM radio it also plays MP3s from USB and SD

as Renaud from the 580 Capucinette says  - if you want to go fast you have your food, water, suncream in the cockpit and HANDSTEER listening to music.

 Twin Mainsheet -

Companionway washboard Portlight 

Here is the twin mainsheet installed - I have used this on my previous boats and it works really well, and it cancels out the need for a traveller. It also clears the cockpit and also enables the boom to be held in position. I may also add a boombrake system to "brake the boom" if needed later - I have a system that I used on my previous boat that slows the boom as you tack/gybe using blocks and an endless line to slow the booms travel, and also have an aluminium "figure 8 climbing descender" to use as a brake as well so there are 2 choices for that system I will use the best after trying and testing them. the only thing is they add extra "knitting" to the system.

and the top part of the two piece washboard gets a portlight

the way the bottom half closes

the 2 piece companionway washboards will be used when it is not neccesary to use

the one piece hatch that lives under the hatch garage/spraydodger

PLEASE visit our youtube channel and subscribe if you want further video updates

CLICK HERE

 The forepeak/cargo hold door has been fitted

This is the door to the front of the boat that will create a watertight closure at the mast bulkhead with the addition of some neoprene seals and some fastenings (both still to be added. I have added a retaining cleat and a wood fairlead with some shockcord - this is seen on the top left of the door. The retaining cleat is a multipurpose hook that has already gained some hangers-on.

The door will most probably gain some add-ons in addition to the compass - to become a navigation station along with the already fitted chart table/bunk insert - many things on Cagarro are designed to be multi-use.

I am looking at adding a holder for the mobile phone that has backup charts added to it, and ais via wifi to the ais transponder -  my dividers and parallel rules, pencils pens etc etc.

any suggestions are most welcome.

also a small reminder to visit the youtube channel
and to consider subscribing (totally free)

here is the link

The Setka CAGARRO Youtube channel

this will help to promote and publicize the existence of a small yet roomy, affordable, super tough, unsinkable, epoxy plywood composite OCEAN GOING /SAILING boat and increase awareness of the possibility to build one yourself

 Deck tour and other details

 youtube video posted

This video explains the deck layout I am using, sunbrella spray dodger, companionway hatch closure and some other things.

Please visit the cagarro youtube channel  - see the link on the right hand side panel 

or 

TAP or CLICk the link below

https://www.youtube.com/@setkacagarro-blogspot-com

and if you would like to see more video content please subscribe, and click the notification button to be notified of the future youtube videos. THANK YOU.