Tuesday, 26 September 2023

 Back to the build

The epoxy and fairing fillers have arrived and the transom has finally had its fairing layer added.


 And the edges of the transom have had their edges added, these were originally radiused in the wood stage, so that the glass fabric could curve around the corner correctly at the glassing stage, now the sharp trailing edge has been added so that the water sheds easily on the wake, they still need to sanded to a fine sharp edge.



The time waiting for the epoxy was not wasted, the interior fillets had a light sand  - it helps that care was taken to create the fillets so not much sanding was needed and some epoxy finger marks were sanded off some of the interior ply panels as well.



at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

 The Zenbivy bed,  a genius sleeping system, that is like sleeping in a bed I like to select products that are very smart and are challengin...

  • (no title)
     Chainplates complete The chainplates were the most complicated of the stainless items, the rest will progress quicker as they are way simpler
  • SETKA A - Cagarro - where it all began
     In March 2020  - I saw on the internet what I thought was a great idea (at the time), something that I would like to do, a small reasonably...
  • (no title)
     Bow basket/ Pulpit series drogue attachment and all chainplates mounted, and galley box  These are some of the many things I have not shown...